XJR (X300) L6-4.0L SC (AJ16) (1995)
Throttle Cable/Linkage: Adjustments
-
Disconnect throttle cable relaxer multi-plug and remove the throttle cable relaxer cover.
-
Displace and reposition the throttle cable locking sleeve.
-
Turn the cable adjuster until the pin of the relaxer quadrant contacts and moves the cam of the relaxer potentiometer.
-
Slacken and adjust the throttle cable lock nut until the throttle potentiometer lower quadrant contacts the upper quadrant.
-
Depress throttle cable 20 times to settle cable.
-
Turn the cable adjuster until the pin of the relaxer quadrant contacts and moves the cam of the relaxer potentiometer.
-
Slacken and adjust the throttle cable lock nut until the throttle potentiometer lower quadrant contacts the upper quadrant.
-
Ensure the cable does not open the throttle pot with a fully closed throttle.
-
Finally tighten throttle cable lock nuts and reposition pedal housing to relaxer cable adjuster locking sleeve.
-
Fit and align relaxer cover.
-
Connect relaxer potentiometer multi-plug.
-
Adjust kick down switch.