jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

ECM - Idle Instability/Hesitation Following Cold Start|Page 4368 > < Engine Performance - Various Driveability Complaints|Page 4363
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
ECM - Idle Instability/Hesitation Following Cold Start

05.1-09

DATE
2/95

Sedan Range

MODEL
1995 MY Sedan (4.0L) Range

VIN
As listed 

SERVICE TECHNICAL BULLETIN

EMS - Cold Idle Instability, Abrupt Low Speed Throttle Transition Warm, Hesitation/Instability at 50/60 MPH (80-100 KM/H) - Repair Procedure

ISSUE:
1995 MY vehicles in the model and VIN ranges listed may display the following symptoms.

SYMPTOMS
Idle hesitation or instability following cold start.

Hesitation or instability at cruising speeds of 50 - 60 mph (80-100 km/h).

Throttle abruptness ("lurching" or hesitation) at low speed, low throttle application with a warm engine.

MODEL

VIN RANGE

Sedan (4.0L NA)

VIN 720001 - 724499 

Range 1995 MY    
XJR Sedan

VIN 720001 - 740020             

These symptoms result from an unfavorable combination of fuel volatility and ignition timing factors. The ECM EPROM has been revised to correct
these conditions from VIN 724500 Sedan (4.0L NA) Range, VIN 740021 XJR Sedan and VIN 197550 XJS (4.0L) Range.

ACTION:
If customers complain of the symptoms listed on vehicles within the quoted VIN range and all other engine parameters are within specification, the ECM
will require upgrading. To upgrade an ECM to the latest specifications, follow the procedure outlined.

ECM UPGRADE PROCEDURE

1.

Complete the Dealer Supplied Information section on a photocopy of the attached Engine Management EPROM Upgrade form.

2.

Call the Jaguar Technical Hotline (1-800-910-8324).

3.

The Jaguar Technical Service Representative will verbally request the Dealer Supplied Information from the form and assign a Case Number
which must be written on the form.

NOTE:

A copy of the completed Engine Management EPROM Upgrade form must be retained in the vehicle service file.

4.

Ship the ECM together with a copy of the completed form and a return address label showing the Repair Order Number to Lucas Industries, Inc.,
via Federal Express Priority Overnight Service. The following information must be included on the Federal Express Airbill.

Recipient's Address:

EPROM Upgrade
Lucas Industries, Inc.
4 William Demarest Place
Waldwick, NJ 07463

Recipient's Phone Number:

ECM - Idle Instability/Hesitation Following Cold Start|Page 4368 > < Engine Performance - Various Driveability Complaints|Page 4363