jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Dashboard - Squeaks & Rattles|Page 522 > < Ignition Relay|Locations|Page 512
Page 1
background image

Air Bag Control Module: All Technical Service Bulletins
Dashboard - Squeaks & Rattles

19.5-03

DATE 
6/96

Sedan Range

Squeaks & Rattles - Noise from Harness &
Airbag Frame - Repair Procedure

MODEL 
1995 MY
Sedan Range

VIN
720001-741673

ISSUE:

Some 1995 MY Sedan Range vehicles within the above VIN range may experience noise caused by the vehicle harness rubbing against both the body
processor module and the passenger airbag module.

ACTION:

After verifying a customer complaint of squeaking from the dashboard, proceed as follows:

REPAIRING HARNESS & AIRBAG FRAME SQUEAKS

1.

Disconnect the vehicle battery.

2.

Remove the underscuttle panel or glove box.

3.

Disconnect the airbag harness, remove the bolts and nut (illustration 1) and remove the deployment door. Place the door on a soft surface to ensure
the veneer will not be damaged.

4.

Remove the passenger airbag module.

5.

Remove the passenger footwell duct.

Dashboard - Squeaks & Rattles|Page 522 > < Ignition Relay|Locations|Page 512