jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Starting System - Intermittent No Crank|Page 5255 > < Neutral Safety Switch|Service and Repair
Page 1
background image

Starter Cable: All Technical Service Bulletins
Starting System - Intermittent No Crank

Sedan Range

DATE 7/96

15-38

Intermittent No Crank -
Starter Cable Loose at Bulkhead Terminal -
Check Terminal Torque

MODEL 
1995-96 MY
Sedan Range

VIN
720001-778598

ISSUE:

Some 1995-96 MY Sedan Range vehicles within the above VIN range may experience an intermittent no crank condition. The condition can be caused
by a starter link cable that is loose at the bulkhead terminal (ST3/5T5).

ACTION:

When investigating a customer complaint of an intermittent no crank condition, check the bulkhead terminal (ST3/ST5) for looseness (Illustration 1).

1.

Disconnect the battery negative cable.

2.

Pull up the rubber cap and torque the nut to 62 - 88.5 lbs. in. (7 - 10 Nm.) to ensure a tight connection.

3.

Reconnect the battery and reset the clock.

PARTS INFORMATION:

DESCRIPTION

PART NUMBER

QTY

Nut

FN 108041/J

1

Starting System - Intermittent No Crank|Page 5255 > < Neutral Safety Switch|Service and Repair