XJR (X300) L6-4.0L SC (AJ16) (1995)
Automatic Transmission Dipstick - Dipstick Tube: Service and Repair
4L80-E Automatic Transmission
Dipstick Stop
INTERNAL DIPSTICK STOP, RENEW
-
Open the hood and fit a suitable fender cover.
-
Raise the vehicle on a ramp.
-
Drain the transmission lubrication system.
-
Remove the fluid pan.
-
Release and remove the dipstick stop to valve body securing bolts.
-
Reposition the internal harness securing clip.
-
Remove the dipstick stop.
-
Clean all relevant parts.
-
Place the dipstick stop aside.
-
Fit a new dipstick stop to the valve body.
-
Reposition and align the internal harness securing clip.
-
Fit and tighten the dipstick stop to valve body securing bolts.
-
Refit the fluid pan.
-
Refit the downpipe to underfloor catalyst olives.
-
Lower the vehicle on the ramp.
-
Refill the transmission unit with fluid.
-
Remove the fender cover and close the hood.
Dipstick/Filler Tube Update