XJR (X300) L6-4.0L SC (AJ16) (1995)
Windshield Washer Reservoir: Service and Repair
-
Refer to general repair notes. See 'Service and Repair.' See: Service and Repair
-
Remove the road wheel and wheel arch liners.
-
Remove the front bumper assembly by undoing the two fixing bolts securing it to the strut.
-
Remove all hoses and multi-plugs from the reservoir pump assembly.
-
Undo the four fixings securing reservoir assembly to the body.
-
Remove the reservoir.
-
Remove wind screen washer and headlamp power wash pump (where fitted) if necessary.
-
Undo all fixing screws securing bumper chrome finisher to the front bumper assembly.
-
Remove power wash jet.
-
Refit components in revers order to removal procedure.