XJR (X308) V8-4.0L SC (AJ26) (1998)
9. Remove door inner waist seal from holder.
Slacken and remove screws securing waist seal holder and remove seal holder.
10. Remove armrest from casing. See: Interior Moulding / Trim/Arm Rest/Service and Repair
11. Slacken and remove puddle lamp securing screws and remove lamp assembly from casing.
12. Remove pocket from door casing.
Release puddle lamp harness from clips at base of door pocket.
Slacken and remove the two screws securing bottom of pocket to casing.
Remove two spring clips securing top of pocket to casing.
13. Lift pocket from casing