XJR (X308) V8-4.0L SC (AJ26) (1998)
7. Position armrest rear cover for access and slacken and remove two screws securing armrest to seat squab.
8. Remove armrest assembly from seat squab.
Installation
1. Position armrest on seat squab.
2. Position seat squab mounting brackets.
3. Fit and tighten the four armrest and squab bracket securing screws.
4. Position armrest rear cover on squab frame and fully seat securing clips.
5. Fit rear seat squab assembly.
6. Fit rear seat belt escutcheons.
7. Fit rear seat cushion.
8. Fit rear heel boards.