XJR (X308) V8-4.0L SC (AJ26) (1998)
Sun Visor: Service and Repair
Sunblind Assembly
SUN BLIND ASSEMBLY
Removal
1. Remove rear seat cushion. See: Seats/Seat Cushion/Service and Repair
2. Remove rear seat squab. See: Seats/Seat Back/Service and Repair
3. Remove rear parcel tray.
4. Place parcel tray face down on clean bench.
5. Remove sunblind assembly.
-
Slacken and remove nuts securing sunblind to parcel tray.
-
Remove washers.
-
Remove sunblind from parcel tray.
-
Repeat procedure to remove opposite side sunblind.
Installation
1. Position sunblind on parcel tray.
2. Install washers on sunblind studs.
3. Install nuts on sunblind studs and tighten nuts to 5 - 7 Nm.
4. Repeat above procedure to install opposite side sunblind.
5. Install parcel tray/sunblind assembly.
6. Install rear seat squab. See: Seats/Seat Back/Service and Repair
7. Install rear seat cushion. See: Seats/Seat Cushion/Service and Repair