XJR (X308) V8-4.0L SC (AJ26) (1998)
/v8-4.0l_sc_(aj26)/Page-1987006.png)
8. Using a suitable knife, carefully cut around headrest support box and seat belt apertures.
CAUTION: The apertures in the foam are over-size and must not be used for guidance when cutting seat belt escutcheon apertures in
cover.
9. With keyways facing forward, fit headrest guide tubes in support boxes.
10. Ensure that lower segmented end of each headrest guide tube fully seats on lower flange of support box.
11. Fit chrome finisher rings to upper ends of headrest guide tubes.
