XJR (X308) V8-4.0L SC (AJ26) (1998)
Brake Rotor/Disc: Testing and Inspection
Rear
Standard Brakes
Brake Disc Run Out - Check
Special Service tools
Dial Test Indicator Gauge and Stand.
1. Raise rear of vehicle and support on stands.
2. Remove wheel.
3. CAUTION: Tie caliper housing aside. Do not allow the caliper housing to hang on the hydraulic hose, as this will damage the hose.
Remove caliper housing from caliper carrier.
Remove anti-rattle spring.
Remove dust covers.
Remove guide pins.
Remove housing from carrier.
Tie caliper housing aside.
4. NOTE: Measurement of the brake disc run-out, must be carried-out with the disc and hub parking-brake adjuster-holes aligned.
Make sure that wheel bearing end-float is correct.