XJR (X308) V8-4.0L SC (AJ26) (1998)
When installing brake booster, make sure push-rod locates inside brake pedal shaft.
Install and tighten nuts to 22 - 28 Nm.
Install grommet.
4. Install final securing nut.
Tighten nut to 22 - 28 Nm.
5. Install brake pedal to pedal housing.
Install pivot pin.
Install nut and tighten to 17 - 23 Nm.
6. Install clevis pin connecting the brake pedal to the master cylinder push-rod fork.