XJR (X308) V8-4.0L SC (AJ26) (1998)
/v8-4.0l_sc_(aj26)/Page-477009.png)
29. Remove the fuel cross over elbow from the intake manifold.
Remove the one bolt each side, which secures the cross over elbow.
Remove the elbow from the manifold.
Remove and discard the O-ring seal.
30. Remove the fuel injectors.
Remove the securing screws from each fuel injector.
Remove the injector clamping plates.
31. Remove the injectors from the manifold; use special tool 303-539 if necessary.
