XJR (X308) V8-4.0L SC (AJ26) (1998)
17. Connect the intake tube to the throttle body.
Connect the intake tube to the throttle body.
Install the two bolts, which secure the intake tube to the throttle body. Tighten to 4-5 Nm.
18. Reconnect the air flow meter multi-plug.
19. Install a new strap to secure the vacuum pipe to the induction elbow.
20. Connect the breather pipe to Bank 1 camshaft cover.
Install a new O-ring seal to the breather pipe.
Reconnect the breather pipe to the stub pipe.
21. Carefully install the engine covers, taking care not to damage the plastic fixings or the rubber inserts.
22. Connect the battery ground cable. Install the battery cover. Reset the clock and the radio information.
23. Check for leaks and that all pipes are securely connected. Remove the protection sheets, close the engine compartment, luggage compartment and
doors.