Jaguar Workshop Service and Repair Manuals > XJR (X308) V8-4.0L SC (AJ26) (1998) > Engine, Cooling and Exhaust | Engine | Timing Components | Timing Chain | Component Information | Service and Repair | Timing Chain (Primary) - Bank 1

Timing Chain (Primary) - Bank 1|Page 2467 > < Timing Chain (Primary) - Bank 1|Page 2465

Page 3

10. Rotate the crankshaft until the triangular arrow indent on the drive plate is visible through the access hole; confirm that the timing flat on each

camshaft is uppermost.

11. Install the crankshaft setting peg 303-531 to the crankshaft position sensor location.

Install the crankshaft setting peg 303-531.
Position the crankshaft so that the setting peg engages fully into the timing slot.
Install and tighten the bolt to secure the setting peg.

12. Remove the damper securing bolt from the crankshaft.
13. Lower the vehicle on the ramp.

14. Install the camshaft locking tool 303-530 to Bank 1 camshafts, aligning the shafts slightly as necessary.

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain / Service and Repair / Timing Chain (Primary) - Bank 1
Page 2466

Timing Chain (Primary) - Bank 1|Page 2467 > < Timing Chain (Primary) - Bank 1|Page 2465

Jaguar Workshop Service and Repair Manuals

XJR (X308) V8-4.0L SC (AJ26) (1998)

Engine, Cooling and Exhaust Engine Timing Components Timing Chain / Service and Repair / Timing Chain (Primary) - Bank 1 Page 2466

Engine, Cooling and Exhaust Engine Timing Components Timing Chain / Service and Repair / Timing Chain (Primary) - Bank 1 Page 2466

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain / Service and Repair / Timing Chain (Primary) - Bank 1
Page 2466

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain / Service and Repair / Timing Chain (Primary) - Bank 1
Page 2466