Jaguar Workshop Service and Repair Manuals > XJR (X308) V8-4.0L SC (AJ26) (1998) > Engine, Cooling and Exhaust | Engine | Timing Components | Timing Chain | Component Information | Service and Repair | Timing Chain (Primary) - Bank 1

Timing Chain (Primary) - Bank 1|Page 2470 > < Timing Chain (Primary) - Bank 1|Page 2468

Page 6

2. Install the chain tensioning tool 303-532 to the exhaust camshaft sprocket.

Reposition the sprocket (and the VVT unit) for the most advantageous position for use of the tool. Remove the tool.

3. Install the primary timing chain.

Install the primary chain to position over the crankshaft sprocket and the VVT unit sprocket. There must be no slack on the drive side of the
primary chain and the VVT unit must not be rotated on the camshaft.

4. Install the primary chain tensioner blade.

Position the tensioner blade to the cylinder block. Install the retaining/pivot bolt and tighten it to 12-16 Nm.

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain / Service and Repair / Timing Chain (Primary) - Bank 1
Page 2469

Timing Chain (Primary) - Bank 1|Page 2470 > < Timing Chain (Primary) - Bank 1|Page 2468

Jaguar Workshop Service and Repair Manuals

XJR (X308) V8-4.0L SC (AJ26) (1998)

Engine, Cooling and Exhaust Engine Timing Components Timing Chain / Service and Repair / Timing Chain (Primary) - Bank 1 Page 2469

Engine, Cooling and Exhaust Engine Timing Components Timing Chain / Service and Repair / Timing Chain (Primary) - Bank 1 Page 2469

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain / Service and Repair / Timing Chain (Primary) - Bank 1
Page 2469

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain / Service and Repair / Timing Chain (Primary) - Bank 1
Page 2469