Jaguar Workshop Service and Repair Manuals > XJR (X308) V8-4.0L SC (AJ26) (1998) > Engine, Cooling and Exhaust | Engine | Timing Components | Timing Chain Tensioner | Component Information | Service and Repair | Timing Chain Tensioner (Primary) - Bank 1

Timing Component Alignment Marks > < Timing Chain Tensioner (Primary) - Bank 1|Page 2553

Page 7

Install the sensor to the flywheel housing and fit the securing bolt. Tighten to 8-12 Nm.
Install the access grommet to the housing.

12. Lower the ramp.
13. Remove the paint protection sheets and close the engine compartment cover.
14. Connect the battery and install the battery cover.

Refer to the Battery Reconnection Procedure.

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain Tensioner / Component Information
Service and Repair / Timing Chain Tensioner (Primary) - Bank 1
Page 2554

Timing Component Alignment Marks > < Timing Chain Tensioner (Primary) - Bank 1|Page 2553

Jaguar Workshop Service and Repair Manuals

XJR (X308) V8-4.0L SC (AJ26) (1998)

Engine, Cooling and Exhaust Engine Timing Components Timing Chain Tensioner / Component Information Service and Repair / Timing Chain Tensioner (Primary) - Bank 1 Page 2554

Engine, Cooling and Exhaust Engine Timing Components Timing Chain Tensioner / Component Information Service and Repair / Timing Chain Tensioner (Primary) - Bank 1 Page 2554

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain Tensioner / Component Information
Service and Repair / Timing Chain Tensioner (Primary) - Bank 1
Page 2554

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain Tensioner / Component Information
Service and Repair / Timing Chain Tensioner (Primary) - Bank 1
Page 2554