XJR (X308) V8-4.0L SC (AJ26) (1998)
25. Remove the timing cover, step 2.
Standing at the right hand side of the vehicle, rotate and maneuver the cover upwards to clear the water pump and hoses.
26. Remove the timing cover, step 3.
Lift the cover clear of the engine compartment.
27. Clean all parts and mating faces.
Installation
1. Install new seals to the timing cover.
Install and fully locate, a new seal to the inner groove on the face of the timing cover.
Install and fully locate, a new seal to the outer groove on the face of the timing cover.
Remove the transit ring and check that the oil seal is not damaged.