XJR (X308) V8-4.0L SC (AJ26) (1998)
/v8-4.0l_sc_(aj26)/Page-528002.png)
5. Pull the VVT solenoid clear and discard the O-ring.
Installation
1. Installing a new VVT solenoid assembly is the reverse of the removal procedure. Fit a new O-ring, lubricated with petroleum jelly.
2. Install and tighten the two bolts to 10-14 Nm.
3. Remove the paintwork protection sheets and close the cover.
4. Connect the battery and install the battery cover.
