XJR (X308) V8-4.0L SC (AJ26) (1998)
Exhaust Manifold: Service and Repair
Exhaust Manifold - Vehicle Set
Removal
1. Open the engine compartment and fit paintwork protection sheets.
2. Remove the downpipe catalytic converter, right hand side.
3. Remove the downpipe catalytic converter, left hand side.
4. Remove the front silencer.
5. Remove the air cleaner assembly.
6. Working from above the vehicle, remove the bolts, which secure the front section of the left hand exhaust manifold to the cylinder head.
7. Working from below the vehicle, reposition the steering rack for access.
Remove the two bolts, which secure the steering rack at the driver's side.
Loosen, but do not remove, the two bolts, which secure the steering rack at the passenger side.
Reposition the steering rack for access.
8. Working from below the vehicle, remove the manifold.
Remove the bolts, which secure the rear section of the exhaust manifold to the cylinder head.