XJR (X308) V8-4.0L SC (AJ26) (1998)
/v8-4.0l_sc_(aj26)/Page-839002.png)
(1) Disconnect the vacuum pipe from the T piece.
(2) Disconnect the breather hose T piece.
(3) Remove the bolt which secures the induction elbow to the elbow support plate.
(4) Loosen but do not remove the two lower bolts securing the induction elbow support plate to the engine bracket.
8. Remove tfl6 induction elbow from the vehicle.
(1) Release and pull back the bypass hoses securing clips.
