XJR (X308) V8-4.0L SC (AJ26) (1998)
4. Remove locking ring using special tool 412-070 (JD 174).
Install special tool to locking ring.
Using a suitable bar, turn special tool anti-clockwise to release locking ring from the five tank tabs.
5. Lift flange assembly slightly and disconnect fuel pump link lead from the underside of flange connector. Secure connector to tank aperture.
6. Discard sealing ring.
Installation
1. Install new sealing ring. Make sure it is seated correctly.
2. Connect fuel pump link lead to flange connector.