XJR (X308) V8-4.0L SC (AJ26) (1998)
/v8-4.0l_sc_(aj26)/Page-1063029.png)
9. Displace the radiator from the top mounting rubbers.
Installation
1. Fit and seat the radiator to the top mounting rubbers.
2. Fit the two securing bolts. Ensure that the ambient air temperature sensor mounting bracket is secured by the left hand radiator bolt.
3. Re-connect the radiator feed hose, return hose and bleed pipe. Fit all hose spring clips.
4. Refill the radiator coolant.
5. Fit the grill assembly.
6. Fit the engine radiator and air conditioning condenser assembly.
7. Reconnect the battery. Refer to the battery reconnection procedure in Starting and Charging.
8. Remove the paintwork protection sheets and close the engine cover.
Bank 1
Removal
1. Remove charge air cooler, bank 1.
Installation
1. Installation is a reversal of the removal procedure.
Bank 2
Removal
1. Remove charge air cooler, bank 2.
Installation
1. Installation is a reversal of the removal procedure.
Intercooler Temperature Sensor
Removal
1. Open the engine compartment and fit paintwork protection sheets.
