XJR (X308) V8-4.0L SC (AJ26) (1998)
Ignition Coil: Service and Repair
Coil On Plug - Bank 1
Removal
1. Disconnect battery ground cable. Refer to 'Battery, Battery Cable.' See: Starting and Charging/Battery/Battery Cable/Negative
2. Remove the air intake tube/meter/air cleaner cover for access.
3. Remove coil on-plug cover.
Remove six bolts.
Remove cover.
Clean mating faces.
4. Detach harness from retaining clips as necessary and disconnect relevant coil connector.