XJR (X308) V8-4.0L SC (AJ26) (1998)
Intake Air Temperature Sensor: Service and Repair
Second Air Temperature Sensor
Removal
1. Open the engine compartment and fit paintwork protection sheets
2. Disconnect the air temperature sensor multi-plug at the rear of 'A' bank charge air cooler.
3. Remove the air temperature sensor.
Remove the air temperature sensor using a deep socket
Remove and discard the sensor sealing washer.
Installation
1. Fitting the sensor is the reversal of the removal procedure. Ensure that a new sealing washer is fitted.
2. Remove the paintwork protection sheets and close the engine compartment.