XJR (X308) V8-4.0L SC (AJ26) (1998)
3. Measure the resistance between EM010/020 and the MAF meter connector PI035/004.
Is the resistance less than 0.5 Ohms?
Yes: Go to X6
No: Inspect harness/connector (PI001/031) and splice EMS002. Repair as necessary. Reconnect PI042 and PI006 (electronic throttle body),
EM010, EM011 (ECM) and PI035 (MAF meter). Test the system for normal operation.
X6 END
1. Perform appropriate service drive cycle and check for the presence of DTC.
Has the fault code cleared?
Yes: STOP
No: Contact Jaguar Service
Pinpoint Test Y: P0113
Pinpoint Y Index
Y1: RETRIEVE DTCS
Y2: CHECK IAT SENSOR RANGE
Y3: CHECK FOR SHORT TO B+
Y4: CHECK SUPPLY VOLTAGE
Y5: END
Y1 RETRIEVE DTC
Note: Battery and or ECM disconnection prior to scanning will erase all data, ensure that the correct DTC is present.