XJR (X308) V8-4.0L SC (AJ26) (1998)
4. Fit disc shield to vertical link.
Position disc shield.
Fit and tighten bolts.
5. Fit vertical link and hub assembly to vehicle.
6. Fit brake disc.
7. Fit wheel.
8. Remove stands and lower vehicle.
Nut - hub to axle shaft
304 - 336 Nm
Nut - hub carrier pivot pin
88 - 118 Nm
Bolt - ABS sensor to hub carrier
8 - 10 Nm
Hub face maximum run-out
0.057 mm
Wheel Seal
Rear Hub Oil Seals