XJR (X308) V8-4.0L SC (AJ26) (1998)
/v8-4.0l_sc_(aj26)/Page-1700014.png)
Install and fully seat new inner bearing seal using special tool 205-234.
5. Place block of wood on hydraulic press-bed and position hub carrier on block.
6. CAUTION: Do not allow press load to be directed onto hub studs.
Align ABS rotor to hub and operate press to fully seat rotor on hub.
7. Install pivot pin sleeve in carrier bearings.
8. Install shims on pivot pin sleeve in positions noted during removal.
