XJR (X308) V8-4.0L SC (AJ26) (1998)
/v8-4.0l_sc_(aj26)/Page-1701036.png)
20. Using new tie strap, secure wheel speed sensor harness to brake hose clip.
21. Install parking brake shoes.
22. Install special tool (204-195) on studs and install securing nuts.
23. Tighten hub nut to 304-336 Nm.
24. Remove nuts and withdraw special tool (204-195) from hub studs.
25. Install brake disc.
26. Install rear wheel.
27. Remove stands and lower vehicle.
28. Raise vehicle on four-post lift.
