XJR (X308) V8-4.0L SC (AJ26) (1998)
Valve Body: Service and Repair
Removal
NOTE: This procedure will not remove residual fluid from the torque converter.
1. Disconnect the battery ground lead.
2. Raise the vehicle for access.
3. Remove the RH catalytic converter.
4. Remove the harness heatshield lower fixing.
Remove the screw heatshield/fluid pan clamp.
5. Remove the harness heatshield.
Pull the heatshield from under the clip.
6. Disconnect the transmission link harness connector.
Release the locking lever.