XJR (X308) V8-4.0L SC (AJ26) (1998)
/v8-4.0l_sc_(aj26)/Page-1333003.png)
2. Align monostrut upper mountings and install but do not tighten bolts
3. Raise rear of suspension to align with monostrut lower mounting holes.
4. Install monostrut lower bolts and nuts and tighten to 77-103 Nm.
5. Tighten monostrut upper bolts to 88-118 Nm.
6. Raise vehicle, remove stands and lower vehicle. Refer to Vehicle Lifting.
