XJR (X308) V8-4.0L SC (AJ26) (1998)
Flex Plate: Service and Repair
Drive Plate (SC) 98MY
Removal
1. Open the engine compartment and fit paint protection sheets.
2. Disconnect the battery ground cable.
Remove the battery cover.
3. Remove the Engine Covers, Air Intake Tube, Catalytic Converters and the Front Muffler. Drain the transmission fluid and remove the transmission
for access.
4. Remove the drive plate.
Prevent the drive plate from rotating by use of a small wedge in the ring gear.
Remove the bolts, which secure the drive plate to the crankshaft.
Remove the drive plate.
5. Clean the crankshaft mating face and any other components, which are to be installed.
Installation