XJR (X308) V8-4.0L SC (AJ26) (1998)
Power Window Switch: Service and Repair
Rear Door
Rear Door Glass Lift Switch/Ashtray Assembly
REAR DOOR GLASS LIFT SWITCH/ASHTRAY ASSEMBLY
Removal
1. Remove casing/armrest assembly from door. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair
2. Remove armrest from casing. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair
3. Position armrest for access, slacken and remove two switch pack securing screws and remove switch pack assembly from armrest.
4. Slacken and remove screws securing veneer panels to switch and ashtray.
Installation
1. Position veneer panels on switch and ashtray, and fit and tighten securing screws.
2. Position switch/ashtray assembly on armrest and fit and tighten securing screws.
3. Fit armrest to door casing. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair
4. Fit casing/armrest assembly to door. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair
Rear Door Glass Lift Switch/Ashtray Veneer Panels
Removal
1. Remove door casing veneer panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair
2. Remove door casing. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair
3. Remove door armrest and remove switch/ashtray assembly from armrest. See: Body and Frame/Interior Moulding / Trim/Arm Rest/Service and
Repair