XJR (X308) V8-4.0L SC (AJ26) (1998)
ADHESIVE SEALANT
The adhesive sealant is supplied as a twin tube pack, as shown in Illustration 1.
^
The two components, adhesive and accelerator are supplied in separate tubes but are mixed in equal quantities in the mixer tube of the Betagun.
^
Uncured adhesive residues can be easily removed with 3350 or 3500 cleaners. Cured adhesive can only be removed mechanically.
BETAGUN - ADHESIVE SEALANT APPLICATION SYSTEM
^
The Betagun, adhesive sealant application system (Illustration 2), is an electric motor driven applicator that applies an equal force to both cartridges
of the pack, to ensure a controlled mix of the two ingredients of the adhesive sealant.
^
The flow rate of the mixed adhesive and accelerator is controlled by trigger pressure.