XJR (X308) V8-4.0L SC (AJ26) (1998)
Wiper Motor: Service and Repair
Early Type
Removal
1. Remove battery cover and disconnect ground cable from battery terminal.
2. Remove top covers from LH and RH bulkheads and rear of engine compartment.
3. Remove wiper arm and blade assembly. See: Wiper Arm/Service and Repair
4. Remove plenum cover.
5. Remove motor harness multiplug from clip, disconnect multiplug and position harness clear of clip.
6. Slacken and remove nut securing wiper spindle to top of plenum, remove washer and seal and discard seal.
7. Slacken and remove nut securing engine harness main multiplug to mounting bracket and position multiplug for access.