XJR (X308) V8-4.0L SC (AJ27) (2000)
1. Install front mounting brackets.
Position and fully seat mounting bracket on crossbeam.
Install the four bolts and tighten to 22 - 28 Nm.
Install heatshield.
Repeat procedure to install mounting bracket on opposite side of crossbeam.
2. Install upper wishbone/hub assemblies on crossbeam.
Position upper wishbone on crossbeam.
Install fulcrum shaft threaded end facing rearward.
Install fulcrum shaft securing nut and tighten to 60 - 80 Nm.
Repeat procedure to install opposite side upper wishbone/hub assembly.