XJR (X308) V8-4.0L SC (AJ27) (2000)
20. Release cable from 'J' gate and position to permit carpet withdrawal.
21. With assistance lift and remove carpet, exercising care to avoid damaging adjacent fittings.
Installation
1. With assistance, position carpet in vehicle ensuring that seat harness and handbrake lever are correctly positioned in apertures.
2. Ensure that gear selector is in position 'R'.
3. Install gear selector cable in 'J' gate.
1. Position gear selector cable in support bracket.
2. Connect inner cable to 'J' gate stud and fit and tighten securing nut.
4. Adjust gear selector cable.
1. Adjust selector cable nuts so that selector lever freely moves to 'R' position in gate.