XJR (X308) V8-4.0L SC (AJ27) (2000)
/v8-4.0l_sc_(aj27)/Page-514001.png)
Knock Sensor: Service and Repair
Bank 2
Removal
1. Remove supercharger. See: Fuel Delivery and Air Induction/Supercharger/Service and Repair
2. Remove knock sensor from engine.
Detach connector and disconnect.
Remove knock sensor.
Installation
1. Installation is a reversal of the removal procedure.
2. Tighten sensor to 31 - 41 Nm.
