XJR (X308) V8-4.0L SC (AJ27) (2000)
24. Slacken but do not remove crossbeam rear nuts.
-
Slacken crossbeam LH rear mounting nut.
-
Repeat procedure to slacken crossbeam RH rear mounting nut.
25. Release lower steering column from pinion shaft.
1. Remove lower steering column nut and bolt.
-
Move column upwards to release it from pinion shaft.
26. Disconnect steering rack transducer harness front connector.
-
Release harness connector from body retaining clip.
-
Disconnect connector.
27. Support weight of crossbeam.
-
Position a jack under crossbeam.
-
Place a piece of wood between jack and crossbeam.
-
Raise jack to just support crossbeam.