XJR (X308) V8-4.0L SC (AJ27) (2000)
6. Install power steering fluid reservoir.
-
Position reservoir on mounting bracket.
-
Install reservoir securing nuts and bolts.
7. From engine compartment, tighten crossbeam front RH bolts to 22-28 Nm.
8. Install lower steering column on pinion shaft.
-
Move column downwards to engage coupling splines on pinion shaft.
1. Install nut and bolt and tighten to 22-28 Nm.
9. Install shock absorber on lower wishbone.
-
Lift lower wishbone to align shock absorber lower mounting.
-
Install bolt and nut and tighten nut to 43-57 Nm.
-
Repeat procedure to install opposite side shock absorber.
10. Release engine from support tool.