XJR (X308) V8-4.0L SC (AJ27) (2000)
31. Secure pipes to pinion housing.
-
Ensure pipes and retaining plate are correctly seated.
-
Install bolt and tighten to 9-12 Nm.
32. Secure return pipe on steering rack.
1. Position pipe rubber support on steering rack.
2. Position pipe on support.
3. RHD vehicles. Position harness on pipe support rubber.
4. Secure pipe and harness to support with new tiestrap.
33. RHD vehicles. Using new tiestrap, secure harness to steering rack.
34. Connect steering harness.
-
Route harness connector to body front location.
-
Connect steering harness connector.
-
Install connector in body retaining clip.