XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
/v8-4.0l_(aj26)/Page-1972002.png)
5. Disconnect the harness from the module.
-
Release the bolt which secures the harness multi-plug to the module. Disconnect the harness multi-plug.
6. Remove the module.
1. Remove the three nuts which secure the module to the fascia.
2. Remove the module.
Installation
1. Installation is the reverse of removal.
2. Perform the Battery Reconnection Procedure. See: Starting and Charging/Battery/Service and Repair
