XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
6. UK specification driver door only.
Fit security shield over lock barrel operating rod and locate under spring clip at rear.
Fit and tighten securing bolt.
7. Fit glass rear runner.
Position rear runner on glass.
Fit but do not tighten lower securing screws.
Fit upper securing screw. Ensure it is aligned with marker then fully tighten.
Fully tighten lower securing screws.
8. Reposition PVC secondary water shedder.
9. Fit door main water shedder.
10. Fit door casing.
11. Connect ground cable to battery terminal and fit battery cover. Refer to Battery Reconnection Procedure. See: Starting and
Charging/Battery/Service and Repair