XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
/v8-4.0l_(aj26)/Page-2078002.png)
12. Disconnect hydraulic cylinder harness multiplug (RH hydraulic cylinder only).
13. Free headlining rear quarter for access.
Slacken and remove mounting bracket cover plate lower securing screw, position headlining for access and remove two remaining screws.
14. Move hydraulic cylinder clear of half pivot and remove and retain wavy washer from pivot.
15. Position a piece of absorbent cloth below hydraulic cylinder to protect paintwork from any fluid spillage.
