XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
Power Seat Motor: Service and Repair
Driver Seat Cushion Riser Motor
Removal
1. Remove battery cover and disconnect ground cable from battery terminal. See: Starting and Charging/Battery/Battery Cable/Negative/Service and
Repair
2. Remove driver seat for access. See: Service and Repair
3. Release seat cushion riser harness multiplug from mounting bracket clip and disconnect multiplug.
4. Remove and discard star securing clip from seat riser motor clevis pin.
5. Slacken but do not remove the two driver seat fore and aft adjustment motor securing bolts.