XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
If squab foam is to be renewed, carefully remove heater element.
Installation
1. If squab cushion has been renewed, apply suitable adhesive to foam and fit and fully seat heating element.
2. Carefully insert and position foam cushion in squab cover and secure with velcro fasteners.
3. Fasten strap securing squab foam to seat frame.
4. Connect seat harness multiplug, position in mounting and secure with velcro fastener.
5. Position squab to seat frame and secure with the nine clips.
6. Fit seat back finisher. See: Seat Back
7. Connect earth cable to battery terminal and fit battery cover.