XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
/v8-4.0l_(aj26)/Page-1480002.png)
-
Position tool between brake pedal and seat frame.
-
Turn the tool wheel until the brake pedal is held 60 mm down from its released position.
6. Tighten bleed nipples to:
-
Front caliper bleed nipple 4 - 6 Nm.
-
Rear caliper bleed nipple 8 - 11 Nm.
-
Remove bleed tubes and containers.
7. Remove elbow from washer bottle filler-neck .
-
Remove and discard 'O'-ring seal.
8. Disconnect electrical connector from bottom of control module.
