XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
/v8-4.0l_(aj26)/Page-1503002.png)
7. Remove the brake pads (arrows) from the caliper.
8. Unscrew the carrier securing bolts (1).
9. Remove the carrier (2) from the vertical link.
10. Carefully remove brake dust from the brake caliper, carrier, wheel, wheel hub and rotor.
WARNING: Brake dust can, if inhaled, damage your health. always use a vacuum brush to remove dry brake lining dust. never use an
air line.
Installation
1. Install the caliper carrier on the vertical link.
2. Align the carrier and vertical bolt holes (1).
3. Install the carrier securing bolts (2) and tighten to 120-160 Nm.
