XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
/v8-4.0l_(aj26)/Page-1503005.png)
7. Close bleed nipples on both calipers.
-
Tighten bleed nipples to 12 - 16 Nm.
-
Remove bleed tubes and containers.
8. Release brake hose from caliper.
-
Remove union bolt.
-
Remove and discard sealing washers.
-
Install plugs into caliper and hose.
9. Remove brake pads from caliper.
-
Remove 'R' clips.
-
Withdraw pins from caliper.
-
Remove anti-rattle spring.
-
Remove brake pads.
CAUTION: Only remove the bolts securing the caliper anchor bracket to the vertical link. Refer to caution above for more information.
