XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
/v8-4.0l_(aj26)/Page-1504004.png)
11. Remove caliper carrier from hub carrier.
-
Remove bolts.
-
Remove carrier.
12. Clean all mating surfaces and remove brake dust. See Warning above.
Installation
1. Install caliper carrier to hub carrier.
-
Align carrier to hub carrier.
-
Install and tighten bolts to 54 - 66 Nm.
2. Make sure piston is fully retracted into caliper housing.
-
Remove plug from caliper housing.
-
Retract piston.
